|
 |
Proceedings:
Vencl A. (Ed.), Proceedings of the 10th
International Conference on Tribology – BALKANTRIB '20, University of Belgrade, Faculty of Mechanical Engineering and Serbian Tribology
Society,
Belgrade, Kragujevac, 2021 |
|
|
Book:
Hvizdoš P., Vencl A.,
Ceramic matrix composites with carbon nanophases: Development, structure,
mechanical and tribological properties and electrical conductivity, in:
Brabazon D. (Ed.), Encyclopedia of Materials: Composites, Volume 2, Elsevier, Amsterdam, 2021,
116-133 |
|
|
Monograph:
Kandeva-Ivanova M., Vencl A., Karastoyanov D.,
Advanced Tribological Coatings for Heavy-Duty Applications: Case Studies,
Prof. Marin Drinov Publishing House of Bulgarian Academy of Sciences, Sofia,
2016 |
|
|
Proceedings:
Vencl A. (Ed.), Proceedings of the 14th
International Conference on Tribology – SERBIATRIB ‘15, Serbian Tribology
Society and University of Belgrade, Faculty of Mechanical Engineering,
Kragujevac, Belgrade, 2015 |
|
|
Book:
Vencl A., Tribology of the Al-Si
alloy based MMCs and their application in automotive industry, in:
Magagnin L. (Ed.),
Engineered Metal Matrix Composites: Forming Methods, Material Properties and
Industrial Applications, Nova Science Publishers, New York,
2012, 127-166 |
|
|
Proceedings:
Vencl A., Marinković A. (Eds.),
Proceedings of the 11th International
Conference on Tribology – SERBIATRIB ‘09, Serbian Tribology
Society and University of Belgrade,
Faculty of Mechanical Engineering, Kragujevac,
Belgrade, 2009 |
|
|
Brochure:
Rac A.,
Serbian
Tribology Society: History and Programme of Development, Serbian Tribology
Society and University of Belgrade,
Faculty of Mechanical Engineering, Kragujevac,
Belgrade, 2009 (in Serbian) |
|
|
Book: Rac A.A., Lubricants and
Machine Lubrications, Faculty of Mechanical Engineering, Belgrade, 2007
(in Serbian) |
|
|
Monograph:
Rac A.,
Vencl A.,
Sliding Bearing Metallic Materials – Mechanical and
Tribological Properties, Faculty of Mechanical
Engineering
and Akademska misao, Belgrade, 2004
(in Serbian) |
|
|
Monograph:
Rac
A.,
Chapters in
monograph:
Babić
M. (Ed.),
Tribology in Yugoslavia,
Yugoslav Tribology Society,
Kragujevac, 1997 |
|
|
Book:
Ivković,
B., Rac
A.,
Tribology,
Yugoslav Tribology Society,
Kragujevac, 1995
(in Serbian) |
|
|
Book:
Rac A., Basics of
Tribology, Faculty of Mechanical Engineering, Belgrade, 1991 (in Serbian) |
|
|
Book: Rac A.,
Lubricants,
Faculty of Mechanical Engineering, Belgrade,
1991 (in Serbian) |
|
|
Handbook: Adžić M., Rac A., Memetović S.,
Handbook for Fuel, Industrial Water and Lubricants
Laboratory Measurements,
Faculty of Mechanical Engineering, Belgrade,
1990 (in Serbian) |
|
|
Handbook: Rac A., Duboka, Č.,
Tribology, in: Savić Z. (Ed.),
Mechanical Engineering Handbook,
Zavod za udžbenike i nastavna sredstva, Belgrade, 1987,
555-610 (in Serbian) |
|
|
Mladenović I., Lamovec J., Vorkapić M., Frantlović M., Poljak P.,
Obradov M., Vencl A., A laboratory prototype of an automated
device for testing adhesion by bending test of thin metal films on flexible
foils, Materials and Chemical
Technologies Scientific Committee of the Serbian Ministry of Education, Science
and Technological Development, 2021 (in Serbian) |
|
|
Jegdić B., Bobić B., Panić V., Vencl A., Stevanović J., Bobić I.,
The method of determining the tendency to intercrystalline
corrosion of stainless steel X5CrNi18-10 on-site, Materials and Chemical
Technologies Scientific Committee of the Serbian Ministry of Education, Science
and Technological Development, 2018 (in Serbian) |
|
|
Bobić B., Vencl A., Babić M., Ružić J., Jegdić B., Bobić I.,
Production of nanocomposites with ZA-27 base and SiC/Al2O3
nanoparticles addition by the combination of mechanical alloying and
compocasting process, Faculty of Mechanical Engineering, Belgrade,
1830/3, 2016 (in Serbian) |
|
|
Bobić I., Bobić B., Babić M., Vencl A., Mitrović S.,
Development of domestic hybrid composites A356/SiCp/Grp
with large graphite particles, Fourth International Innovation and
Invention Competition – IIIC 2013, Taipei (Taiwan), 06.12.2013, Poster has won the
gold
medal |
|
|
Bobić I., Bobić B., Babić M., Vencl A., Mitrović S.,
Development of domestic hybrid composites A356/SiCp/Grp
with large graphite particles, 34. International Exhibition of
Inventions, Technical Improvements, New Products and Youth Creative Work
“MAKINOVA 2013”, Skopje (Macedonia), 15-19.10.2013, Poster has won the silver
medal |
|
|
Bobić I., Bobić B., Babić M., Vencl A., Mitrović S.,
Development of domestic hybrid
composites A356/SiCp/Grp with large graphite particles, 11th International
Innovation Exhibition “ARCA 2013”, Zagreb (Croatia), 03-05.10.2013, Catalogue, 59, Poster has won the silver medal |
|
|
Bobić I., Bobić B., Babić M., Vencl A., Mitrović S.,
Development of domestic hybrid
composites A356/SiCp/Grp with large graphite particles, IX International
Salon of Inventions and New Technologies “New Time”, Sevastopol (Russia), 26-28.09.2013,
Catalogue, 122 |
|
|
Bobić I., Bobić B., Babić M., Vencl A., Mitrović S.,
Development of production technology for domestic
particulate hybrid composites A356/SiC + graphite with aluminum alloy matrix,
33rd International Exibition of Inventions, New Technologies and Design
“Inventions-Belgrade 2013”, Belgrade (Serbia), 22-29.05.2013, Catalogue, 70-71 (in
Serbian), Poster has won the gold medal |
|
|
Bobić I., Vencl A., Babić M., Mitrović S., Bobić B.,
Technological process of production the dual hybrid composite with A356
aluminium alloy matrix and the addition of 10 wt. % SiC particles and 1 wt. %
graphite particles, Faculty of Mechanical Engineering, Belgrade,
902/3, 2011 (in Serbian) |
|
|
Bobić B., Vencl A., Babić M., Mitrović S., Bobić I.,
Metal matrix composites with high wear resistance obtained
by the infiltration of silicon carbide (SiC) and graphite particles into the
aluminium alloy (A356) matrix, 31st International Exibition of
Inventions, New Technologies and Design “Inventions-Belgrade 2011”, Belgrade
(Serbia), 23-27.05.2011, Catalogue, 78-79 (in Serbian), Poster has won the bronze
medal |
|
|
Bobić I., Babić M., Mitrović S., Vencl A., Bobić B.,
Technology of the MMCs with ZA27 matrix and Al2O3 particle reinforcement
production, Faculty of Mechanical Engineering, Kragujevac,
TR-09/2010, 2010 (in Serbian) |
|
|
Bobić I., Babić M., Mitrović S., Vencl A., Bobić B., Tadić B.,
Ceramic crucible of the electro-resistance furnace used in
the compocasting process, Faculty of Mechanical Engineering, Kragujevac, TR-08/2010, 2010 (in Serbian) |
|
|
Bobić I., Bobić B., Babić M., Mitrović S., Vencl A., Tadić B.,
Electrical method for control of the rheological behaviour
of matrix alloys and composites semi-solid casts used in the rheo/compocasting
process, Faculty of Mechanical Engineering, Kragujevac,
TR-07/2010, 2010 (in Serbian) |
|
|
Bobić I., Vencl A., Babić M., Mitrović S., Bobić B.,
Technology of the MMCs with AlSi7Mg0.3 (A356) matrix and
fine Al2O3 particle reinforcement production, Faculty of Mechanical
Engineering, Kragujevac, TR-06/2010, 2010 (in Serbian) |
|
|
Vasic B., Popovic V.,
Vuchic V.R., Danon G., Vencl A.,
Defining the functional and physical compatibility of a modernized tramway
rolling stock with a newly planned LRT system: A case study of Belgrade,
Transportation Planning and Technology, 35, 3, 2012, 241-261 |
|
|
Rac A., Vencl A.,
Ecological and technical aspects of the waste oils
influence on environment, 3rd International Conference on Diagnosis and
Prediction in Mechanical Engineering Systems – DIPRE ‘12, Galaţi (Romania),
31.05-01.06.2012, Proceedings, Paper 6 (Session: Lubrication and Lubricants),
Published also in: Annals of "Dunărea de Jos" University of Galaţi. Fascicle
VIII, Tribology, 18, 1, 2012, 5-11 |
|
|
Assenova E., Majstorovic
V., Vencl A., Kandeva M., Green
tribology and quality of life, International Convention on Quality 2012,
Belgrade (Serbia), 05-07.06.2012, Proceedings, 32-38,
Published
also in:
Advanced Quality, 40, 2,
2012, 26-32 |
|
|
Kandeva М.,
Karastoyanov D., Vencl A., Erosion wear of nickel coatings with nano-size particles of silicon carbide, 9th National Conference on Tribology with International
Participation
– BULTRIB ‘12, Sofia (Bulgaria), 18-20.10.2012, Paper BT-53 (Session
BT-III), Published in: Tribological Journal BULTRIB, 3, 2013, 264-271
(in Bulgarian) |
|
|
Gligorijevic B.R., Vencl A., Katavic B.T.,
Characterization and comparison
of the carbides morphologies in the near surface region of the single- and
double layer iron-based hardfaced coatings, XIV International Symposium
"Young People and Multidisciplinary Research" – ISYPMR 2012, Timișoara
(Romania), 15-16.11.2012, Abstracts Proceedings, 7-8, Published
in: Scientific Bulletin of the "Politehnica" University of Timișoara.
Transaction on Mechanics, 57 (71), Special Issue S1, 2012, 15-20 |
|
|
Zivic F., Babic M.,
Cvijovic-Alagic I., Mitrovic S., Vencl A.,
Wear
behaviour of Ti6Al4V alloy against Al2O3 under linear reciprocating sliding,
Journal of the Balkan Tribological Association, 17, 1, 2011, 27-36 |
|
|
Zivic F., Babic M.,
Mitrovic S., Vencl A.,
Continuous control as alternative route for wear monitoring by measuring
penetration depth during linear reciprocating sliding of Ti6Al4V alloy,
Journal of Alloys and Compounds, 509, 19, 2011, 5748-5754 |
|
|
Bobić B., Mitrović S.,
Babić M., Vencl A., Bobić I.,
Corrosion behaviour of the as-cast and heat-treated ZA27 alloy, 12th
International Conference on Tribology – SERBIATRIB '11, Kragujevac
(Serbia),
11-13.05.2011,
Proceedings, 91-97,
Published also in:
Tribology in Industry, 33,
2, 2011, 87-93 |
|
|
Bobić I., Babić M.,
Mitrović S., Vencl A., Bobić B.,
The effect of temperature on mechanical properties of particulate ZA27/Al2O3
composites,
12th International Conference on Tribology – SERBIATRIB '11, Kragujevac
(Serbia),
11-13.05.2011,
Proceedings, 412-417
(in Serbian) |
|
|
Vencl A., Ferrous-based coatings
for engine cylinder bores made of aluminium alloys: Tribological properties,
International Conference on Materials, Tribology, Recycling – MATRIB 2011, Vela
Luka (Croatia), 29.06-01.07.2011, Proceedings, 527-535 |
|
|
Vencl A., Arostegui S., Bobic I., Tribological properties
of compocasted A356 aluminium alloy composite reinforced with Al2O3, SiC and
graphite particles, 38th Leeds-Lyon Symposium on Tribology, Lyon
(France), 06-09.09.2011, Abstracts Proceedings, Paper 4 (Session III: Control of
Friction and Wear) |
|
|
Vencl A.,
Optimization of the deposition parameters of
thick atmospheric plasma spray coatings, 7th International Conference on
Tribology – BALKANTRIB ‘11, Thessaloniki (Greece), 03-05.10.2011, Proceedings,
275-282,
Published
also in:
Journal of the Balkan Tribological Association, 18, 3, 2012, 405-414 |
|
|
Vencl A., Arostegui S., Favaro G.,
Zivic F., Mrdak M., Mitrović S., Popovic V.,
Evaluation of adhesion/cohesion bond strength of the thick
plasma spray coatings by scratch testing on coatings cross-sections, Tribology International,
44, 11, 2011, 1281-1288 |
|
|
Mrdak M., Vencl A.,
Influence of the deposition parameters on mechanical properties and structure of
NiCr coating deposited by atmospheric plasma spraying, Tehnička dijagnostika,
10, 3, 2011, 9-14
(in Serbian) |
|
|
Vencl A.,
MMCs based on hypoeutectic Al-Si alloy: Tribological
properties in dry sliding conditions, 8th National Conference on Tribology
with International Participation
– BULTRIB
‘11, Sofia (Bulgaria), 28-29.10.2011,
Paper 1 (First Session), Published in: Tribological Journal BULTRIB, 2, 2, 2012, 17-23 |
|
|
Vencl A., Manić N.,
Popovic V., Mrdak M.,
Possibility of the abrasive wear resistance determination with scratch tester,
Tribology Letters, 37, 3, 2010, 591-604 |
|
|
Vencl A.,
Tribological properties of
thixocasted and heat treated hypoeutectic Al-Si alloy A356, 8th
International Symposium INSYCONT '10, Cracow (Poland), 07-09.07.2010, Paper
9 (Session IV),
Published
in:
Scientific Problems of Machines Operation and Maintenance, 44, 3, 2009, 15-23 |
|
|
Vencl A., Bobic I.,
Arostegui S., Bobic B., Marinković A., Babić M.,
Structural, mechanical and tribological properties of A356 aluminium alloy
reinforced with Al2O3, SiC and SiC + graphite particles, Journal of
Alloys and Compounds, 506, 2, 2010, 631-639 |
|
|
Vencl A.,
Arostegui S., Bobic I., Tribological properties of
compocasted A356 aluminium alloy composite reinforced with Al2O3, SiC and
graphite particles, First International Brazilian Conference on Tribology
– TriboBr-2010, Rio de Janeiro (Brazil), 24-26.11.2010, Proceedings, 157-169,
Published without approval |
|
|
Vencl A.,
Bobić I., Mišković Z.,
Effect of thixocasting and heat treatment on the tribological properties of
hypoeutectic Al-Si alloy, Wear,
264, 7-8, 2008, 616-623 |
|
|
Babić M.,
Rac
A., Ivković B.,
15 years of the Serbian
Tribology Society - origin and activities,
6th International
Conference
on Tribology –
BALKANTRIB
'08, Sozopol (Bulgaria),
12-14.06.2008,
Plenary Lectures and Abstract Proceedings, 24-28,
Published
in:
Journal of the Balkan Tribological Association, 14, 3,
2008, 284-291 |
|
|
Vencl A., Rac A., Marinković A.,
Tribological properties of ferrous-based coatings deposited by APS on Al-alloy
substrate under dry sliding conditions,
6th
International
Conference
on Tribology –
BALKANTRIB
'08, Sozopol (Bulgaria),
12-14.06.2008,
Plenary Lectures and Abstract Proceedings, 149 |
|
|
Vencl A.,
Bobić I.,
Tribological properties of A356
Al-Si alloy base composite reinforced with Al2O3 particles (MMC), 5th Congress of the Metallurgists of Macedonia, Ohrid (Macedonia),
17-20.09.2008, Proceedings on CD, M8–07-E |
|
|
Rac A., Vencl A.,
Performance investigation
of chain saw lubricants based on new sunflower oil (NSO), ÖTG-Symposium
2008, Wiener Neustadt (Austria), 20.11.2008, Proceedings, 249-257,
Published
also in:
Tribologie und Schmierungstechnik, 56, 3, 2009, 51-54 |
|
|
Vencl A., Bobić I., Jovanović M.T., Babić M., Mitrović S.,
Microstructural and tribological properties of A356 Al-Si alloy reinforced with
Al2O3 particles, Tribology Letters, 32, 3, 2008, 159-170 |
|
|
Rac A.,
Tribotechnique in the maintenance
service for the sustainable
future,
Conference of Machine Maintenance “KOD-2006”,
Tivat (Montenegro),
27-30.06.2006,
Proceedings
on CD, 1-8
(in Serbian) |
|
|
Vencl A., Avramović S.,
Marinković A.,
Ferrous-based
coating deposited on Al-alloy substrate by atmospheric plasma spraying (APS),
31.
Conference on Production Engineering of Serbia and Montenegro,
Kragujevac (Serbia),
19-21.09.2006, Proceedings,
539-546
(in Serbian) |
|
|
Mišković Z., Bobić I.,
Tripković S.,
Rac A., Vencl A.,
The structure
and mechanical properties of an aluminium A356 alloy base composite with Al2O3
particle additions (MMC), 4th
Balkan
Conference
on
Metallurgy,
Zlatibor (Serbia), 27-29.09.2006, Proceedings, 509-514,
Published also in:
Tribology in Industry, 28, 3-4,
2006, 23-27 |
|
|
Vencl A., Rac A., Bobić
I., Mišković Z., Tribological properties of Al-Si
alloy A356 reinforced with Al2O3 particles,
4th
Balkan
Conference on
Metallurgy,
Zlatibor
(Serbia), 27-29.09.2006,
Proceedings, 527-534,
Published also in:
Tribology in Industry, 28, 1-2,
2006, 27-31 |
|
|
Vencl A., Mrdak M., Cvijović I.,
Microstructures and tribological properties of ferrous
coatings deposited by APS (Atmospheric Plasma Spraying) on Al-alloy substrate,
FME Transactions, 34, 3, 2006, 151-157 |
|
|
Rac A., Vencl A.,
Metallic
sliding
bearings
failures
and malfunctions,
Tehnička dijagnostika, 4, 2, 2005, 59-69
(in Serbian) |
|
|
Rac A., Vencl A.,
Tribological and design parameters of
lubricated sliding bearings, 5th
International Conference on Tribology
–
BALKANTRIB
'05,
Kragujevac (Serbia), 15-18.06.2005, Proceedings,
52-56, Published also in:
Tribology in Industry, 27, 1-2, 2005,
12-16 |
|
|
Vencl A., Rac A., Bobić I.,
Tribological
behaviour of Al-based MMCs and their application in automotive industry,
5th
International Conference on Tribology
–
BALKANTRIB
'05,
Kragujevac (Serbia), 15-18.06.2005, Proceedings,
331-338,
Published also in:
Tribology in Industry,
26, 3-4, 2004, 31-38 |
|
|
Rac, A.,
Ecological aspects of the lubricants
business and possible solutions,
Conference of Machine Maintenance “KOD-2005”,
Bar
(Montenegro),
27-30.06.2005,
Proceedings
on CD,
1-6
(in Serbian) |
|
|
Rosić B., Marinković A., Vencl A.,
Optimum
design of
multispeed
gearboxes
and
modeling
of
transmission
components,
The Fifth International
Conference
“Heavy
Machinery
–
HM 2005”,
Kraljevo (Serbia), 28.06-03.07.2005, Proceedings, I C.17-I C.20 |
|
|
Rac A., Bouzakis K.-D.,
Vencl A., Tsouknidas A.,
Tribological
properties of thixoforming Al-alloy A356 and influence of heat treatment,
2nd International
Conference on Manufacturing Engineering
“ICMEN”, Kallithea of Chalkidiki
(Greece), 05-07.10.2005,
Proceedings, 509-516 |
|
|
Babić M., Ninković R., Rac A.,
Sliding wear behavior of Zn-Al alloys in conditions of boundary lubrication,
The Annals of University “Dunarea de Jos” of Galati, Fascicle VIII, Tribology,
2005, 60-64 |
|
|
Rac A.,
Economic
aspects
of machine
maintenance
strategy,
Tehnička dijagnostika, 3, 2, 2004, 25-30
(in Serbian) |
|
|
Vencl A., Ivljanin B., Dojčinović M.,
Testing of the mechanical
properties for 15Mo3 steel,
Third Youth Symposium on Experimental Solid Mechanics,
Porretta Terme
(Italy), 12-15.05.2004,
Proceedings,
123-124 |
|
|
Rac A.,
Tribology and mechanical systems maintenance: place and role,
XXIX
Conference on
“Machines
and Equipment
Maintenance”, Banja Vrujci
(Serbia), 31.05-03.06.2004, Proceedings,
193-200
(in Serbian) |
|
|
Rosić B., Marinković A., Vencl A.,
Cylindrical
gears
modeling
using CATIA
software,
4th International Conference “Research and Development in Mechanical
Industry
– RaDMI 2004”,
Zlatibor (Serbia),
31.08-04.09.2004, Proceedings, Vol. 1, 73-77 |
|
|
Rosić B., Marinković A., Vencl A.,
Modeling and
structural optimization of cylindrical
gears constructional profiles, Conference on “Research and
Development of Machine Elements – IRMES '04”, Kragujevac (Serbia), 16-17.09.2004,
Proceedings, 173-178 (in Serbian) |
|
|
Rac A., Vencl A.,
Tribological
coatings on
aluminium
alloys used in engine cylinder bore-piston system,
Mobility & Vehicles Mechanics (MVM), 30, Special Edition, 2004, 105-113 |
|
|
Vencl A., Rac A.,
New wear resistant Al based materials and their
application in automotive industry, Mobility & Vehicles Mechanics
(MVM), 30, Special Edition,
2004, 115-139 |
|
|
Rac A.,
Condition
monitoring
and
diagnostics
of
sliding
bearing
failures,
8th International Tribology Conference
– ITC
'03, Belgrade (Serbia),
08-10.10.2003, Proceedings,
271-275
(in Serbian) |
|
|
Vencl A., Rac A.,
Tribology of
wind turbines,
8th International Tribology
Conference –
ITC
'03, Belgrade (Serbia),
08-10.10.2003, Proceedings, 276-279 (in
Serbian) |
|
|
Rac A.,
Economic
aspects
of machine
maintenance
strategy,
Conference of Machine Maintenance “KOD-2003”, Herceg Novi
(Montenegro), 29-31.10.2003, Proceedings, 21-26 (in Serbian) |
|
|
Vencl A., Sedmak A., Grujić B.,
Failure
causes
and replacement costs
analysis of hanging
boiler
pipes at
hydro
power
plant
“Kostolac B”,
Conference of Machine Maintenance “KOD-2003”, Herceg Novi (Montenegro), 29-31.10.2003, Proceedings, 83-90 (in
Serbian) |
|
|
Rac A.,
Failure diagnostic and machine maintenance,
Tribologija u industriji, 22, 2,
2002, 23-25
(in Serbian) |
|
|
Rac A.,
Lubricants for the automotive transmissions, Tribologija u
industriji, 22, 2, 2002, 26-28
(in Serbian) |
|
|
Babić M., Ninković
R., Rac A.,
Zn-Al
alloy
RAR 27
-
research and technical systems maintenance experience,
26th
May Conference
of the Yugoslavia
Maintainers
“Maintenance
of the Technical Systems”,
Novi Sad
(Serbia),
22-24.05.2002, Proceedings, 267-276
(in Serbian) |
|
|
Babić M., Ninković
R., Rac A.,
Tribological
aspect
of
application
of the Zn-Al
alloys
for
manufacturing
the
machine
elements,
Conference on “Research and
Development of Machine Elements – IRMES 2002”,
Jahorina (Republic of Srpska), 19-20.09.2002,
Proceedings, 307-312
(in Serbian) |
|
|
Vencl A., Grujić B.,
Sedmak A., Stanojević-Šumar Z., Vinulović Z., Živković Ž.,
Testing and
analysis
of hanging
boiler
pipes,
Tehnika, 55, 4-5, 2000, 61-66 (in Serbian) |
|
|
Rac A.,
Lubricants monitoring as a part of the machine systems proactive maintenance,
XXIV Yugoslav May
Conference
of Working Means Maintainers
– YUMO 2000,
Herceg Novi
(Serbia), 31.05-02.06.2000,
Proceedings,
Book 1,
157-162
(in Serbian) |
|
|
Rac A., Ninković
R.,
Tribological
properties of
Zn-Al27 bearing alloy
under boundary lubrication, The First Mediterranean
Tribology Conference, Jerusalem (Israel), 08-09.11.2000,
Abstracts,
16 |
|
|
Rac A.,
The
role and requirements
of up-to-date lubricants,
The First Mediterranean Tribology Conference,
Jerusalem (Israel), 08-09.11.2000,
Abstracts, 59 |
|
|
Rac A., Babić M.,
Ninković R., Theory and practice of Zn-Al
sliding
bearings,
The
3rd International Conference of
Tribology
–
BALKANTRIB
'99, Sinaia
(Romania), 02-04.06.1999, Proceedings II, 127-133 |
|
|
Rac A.,
Lubricants in
the machine maintenance
service,
Sixth Yugoslav Conference on Tribology
–
YUTRIB
'99,
Kragujevac
(Serbia),
29-30.09.1999, Proceedings,
3-4
(in Serbian) |
|
|
Rac A.,
Tribology of
gear
pairs,
Sixth Yugoslav Conference on Tribology
–
YUTRIB
'99,
Kragujevac
(Serbia),
29-30.09.1999, Proceedings,
57-58 |
|
|
Ninković R., Babić M.,
Rac A., Domestic Zn-Al alloys as tribological material,
Sixth Yugoslav Conference on Tribology
–
YUTRIB
'99,
Kragujevac
(Serbia),
29-30.09.1999, Proceedings,
59-60 |
|
|
Rac A.,
Industrial
gear
lubrication,
Severs Seventh Symposium
on Mechanical
Transmissions, Subotica
(Serbia),
13.10.1999,
Proceedings,
29-34
(in Serbian) |
|
|
Rac A., Ninković N., Review of the research
and application of domestically produced Zn-Al alloy as a material for
tribological components, V Yugoslav Symposium with International
Participation in the Field of Machinery for Mining, Belgrade (Serbia),
02-03.12.1999, Proceedings (in Serbian) |
|
|
Rac A.,
Proactive maintenance
-
a new approach in the machine systems maintenance,
XXIII
Yugoslav May Conference “Maintenance
of the Technical Systems”,
Kragujevac
(Serbia),
20-22.05.1998,
Proceedings,
Book
2, 805-810
(in Serbian) |
|
|
Rac A.,
Nikčević V., Ninković R., Tribological
study of zinc-aluminium alloys as
bearing materials, 5th International
Symposium
“INSYCONT
'98”,
Cracow
(Poland),
16-18.09.1998,
Published in: Problemy Eksploataciji, 30, 3, 1998,
221-229 |
|
|
Rac A.,
Contemporary
lubricants: role and
requirements,
Tribology in
Industry, 20,
4,
1998,
137-141 |
|
|
Rac A., Nikčević, V., Quality assurance of
tribomechanical system using failure mode and effects analysis, VI
International Symposium INTERTRIBO '96, Stará Lesná (Slovakia), 23-26.04.1996,
Proceedings |
|
|
Rac A.,
Mitrovic R., Nikcevic V., Friction characteristics and
temperature rise in sealed ball bearings, 2nd International Conference on
tribology – BALKANTRIB '96, Thessaloniki (Greece), 05-07.06.1996, Proceedings,
660-666 |
|
|
Rac A., Tribological aspects of the
production equipment maintenance, 26. International Conference on
Production Engineering of Yugoslavia, Podgorica-Budva (Montenegro),
17-20.09.1996, Proceedings, 501-506 (in Serbian) |
|
|
Rac A. The development trends of internal
combustion engines and motor oils: engine-motor oil interaction, GALAX
'96, Kopaonik (Serbia), 25-28.09.1996, Proceedings, 165-174, Published in:
Hemijska industrija, 50, 9, 1996, 371-376 (in Serbian) |