Zbornik radova: Vencl A. (ur.), Proceedings of the 10th International Conference on Tribology – BALKANTRIB '20, Mašinski fakultet Beograd i Srpsko tribološko društvo, Beograd, Kragujevac, 2021

Knjiga: Hvizdoš P., Vencl A., Ceramic matrix composites with carbon nanophases: Development, structure, mechanical and tribological properties and electrical conductivity, u: Brabazon D. (ed.), Encyclopedia of Materials: Composites, Volume 2, Elsevier, Amsterdam (Holandija), 2021, 116-133

Monografija: Kandeva-Ivanova M., Vencl A., Karastoyanov D., Advanced Tribological Coatings for Heavy-Duty Applications: Case Studies, Prof. Marin Drinov Publishing House of Bulgarian Academy of Sciences, Sofia (Bugarska), 2016

Zbornik radova: Vencl A. (ur.), Proceedings of the 14th International Conference on Tribology – SERBIATRIB ‘15, Srpsko tribološko društvo i Mašinski fakultet Beograd, Kragujevac, Beograd, 2015

Knjiga: Vencl A., Tribology of the Al-Si alloy based MMCs and their application in automotive industry, u: Magagnin L. (ed.), Engineered Metal Matrix Composites: Forming Methods, Material Properties and Industrial Applications, Nova Science Publishers, New York (SAD), 2012, 127-166

Zbornik radova: Vencl A., Marinković A. (ur.), Proceedings of the 11th International Conference on Tribology – SERBIATRIB ‘09, Srpsko tribološko društvo i Mašinski fakultet Beograd, Kragujevac, Beograd, 2009

Brošura: Rac A, Srpsko tribološko društvo: istorijat i program razvoja, Srpsko tribološko društvo i Univerzitet u Beogradu, Mašinski fakultet, Kragujevac, Beograd, 2009

Knjiga: Rac A.A., Maziva i podmazivanje mašina, Mašinski fakultet Beograd, Beograd, 2007

Monografija: Rac A., Vencl A., Metalni materijali kliznih ležaja – fizičko-mehanička i tribološka svojstva, Mašinski fakultet Beograd i Akademska misao, Beograd, 2004

Monografija: Rac A., Poglavlja u monografiji: Babić M. (ed.), Tribology in Yugoslavia, Jugoslovensko društvo za tribologiju, Kragujevac, 1997

Knjiga: Ivković B., Rac A., Tribologija, Jugoslovensko društvo za tribologiju, Kragujevac, 1995

Knjiga: Rac A., Osnovi tribologije, Mašinski fakultet Univerziteta u Beogradu, Beograd, 1991

Knjiga: Rac A., Pogonske materije III deo – Maziva, Mašinski fakultet Univerziteta u Beogradu, Beograd, 1991

Priručnik: Adžić M., Rac A., Memetović S., Priručnik za laboratorijska merenja iz pogonskih materijala, Mašinski fakultet Univerziteta u Beogradu, Beograd, 1990

Priručnik: Rac A., Duboka, Č., Tribologija, u: Savić Z. (ur.), Inženjersko mašinski priručnik, Zavod za udžbenike i nastavna sredstva, Beograd, 1987, 555-610

Mladenović I., Lamovec J., Vorkapić M., Frantlović M., Poljak P., Obradov M., Vencl A., Laboratorijski prototip automatizovanog uređaja za ispitivanje adhezije testom na savijanje tankih metalnih filmova na fleksibilnim folijama, MNO za materijale i hemijske tehnologije Ministarstva prosvete, nauke i tehnološkog razvoja Republike Srbije, 2021

Jegdić B., Bobić B., Panić V., Vencl A., Stevanović J., Bobić I., Postupak određivanja sklonosti prema interkristalnoj koroziji nerđajućeg čelika X5CrNi18-10 na terenu, MNO za materijale i hemijske tehnologije Ministarstva prosvete, nauke i tehnološkog razvoja Republike Srbije, 2018

Bobić B., Vencl A., Babić M., Ružić J., Jegdić B., Bobić I., Dobijanje nanokompozita sa osnovom od legure cinka ZA-27 uz dodatak nanočestica SiC ili Al2O3 kombinacijom mehaničkog legiranja i kompokasting postupka, Mašinski fakultet Univerziteta u Beogradu, 1830/3, 2016

Bobić I., Bobić B., Babić M., Vencl A., Mitrović S., Development of domestic hybrid composites A356/SiCp/Grp with large graphite particles, 2013 IIIC第四屆國際創新發明海報競賽 (Fourth International Innovation and Invention Competition – IIIC 2013), Taipei (Tajvan), 06.12.2013, rad je dobio zlatnu medalju

Bobić I., Bobić B., Babić M., Vencl A., Mitrović S., Development of domestic hybrid composites A356/SiCp/Grp with large graphite particles, 34. меѓународна изложба на прoнајдоци, технички унапредувaња, нови производи и младинско творештво “МАКИНОВА 2013”, Скопје (Makedonija), 15-19.10.2013, rad je dobio srebrnu medalju

Bobić I., Bobić B., Babić M., Vencl A., Mitrović S., Development of domestic hybrid composites A356/SiCp/Grp with large graphite particles, 11. međunarodna izložba inovacija „ARCA 2013“, Zagreb (Hrvatska), 03-05.10.2013, katalog, 59, rad je dobio srebrnu medalju

Bobić I., Bobić B., Babić M., Vencl A., Mitrović S., Development of domestic hybrid composites A356/SiCp/Grp with large graphite particles, IX Международный салон изобретений и новых технологий «Новое Время» (IX International Salon of Inventions and New Technologies “New Time”), Sevastopol (Rusija), 26-28.09.2013, katalog, 122

Bobić I., Bobić B., Babić M., Vencl A., Mitrović S., Razvoj tehnologije dobijanja domaćih čestičnih hibridnih kompozita A356/SiC + grafit sa osnovom od aluminijumske legure, 33. međunarodna izložba pronalazaka, novih tehnologija i industrijskog dizajna „Pronalazaštvo-Beograd 2013.“, Beograd, 22-29.05.2013, katalog, 70-71, rad je dobio zlatnu medalju

Bobić I., Vencl A., Babić M., Mitrović S., Bobić B., Tehnološki postupak dobijanja dvojnog hibridnog kompozita sa osnovom od A356 legure aluminijuma uz dodatak 10 mas. % čestica SiC i 1 mas. % čestica grafita, Mašinski fakultet Univerziteta u Beogradu, 902/3, 2011

Bobić B., Vencl A., Babić M., Mitrović S., Bobić I., Kompoziti sa dobrom otpornošću na habanje dobijeni infiltracijom čestica silicijum-karbida (SiC) i čestica grafita u osnovu od aluminijumske legure A356, 31. međunarodna izložba pronalazaka, novih tehnologija i industrijskog dizajna „Pronalazaštvo-Beograd 2011.“, Beograd, 23-27.05.2011, katalog, 78-79, rad je dobio bronzanu medalju

Bobić I., Babić M., Mitrović S., Vencl A., Bobić B., Tehnologija dobijanja kompozitnih materijala sa osnovom od ZA27 legure uz dodatak čestica Al2O3, Mašinski fakultet Univerziteta u Kragujevcu, TR-09/2010, 2010

Bobić I., Babić M., Mitrović S., Vencl A., Bobić B., Tadić B., Keramički lonac elektrootporne peći za izvođenje kompokasting postupka, Mašinski fakultet Univerziteta u Kragujevcu, TR-08/2010, 2010

Bobić I., Bobić B., Babić M., Mitrović S., Vencl A., Tadić B., Električna metoda za kontrolu reološkog ponašanja poluočvrslih rastopa osnovnih legura i kompozita pri izvođenju reo/kompokasting postupka, Mašinski fakultet Univerziteta u Kragujevcu, TR-07/2010, 2010

Bobić I., Vencl A., Babić M., Mitrović S., Bobić B., Tehnološki postupak dobijanja kompozita sa osnovom od AlSi7Mg0.3 (A356) legure uz dodatak sitnih čestica Al2O3, Mašinski fakultet Univerziteta u Kragujevcu, TR-06/2010, 2010

Kostadinov G., Penyashki T., Nikolov A., Vencl A., Improving the surface quality and tribological characteristics of 3D-printed titanium parts through reactive electro-spark deposition, Materials, 17, 2, 2024, Paper 382

Miladinović S., Gajević S., Savić S., Miletić I., Stojanović B., Vencl A., Tribological behaviour of hypereutectic Al-Si composites: A multi-response optimisation approach with ANN and Taguchi grey method, Lubricants, 12, 2, 20224, Paper 61

Vencl A., Svoboda P., Klančnik S., But A., Vorkapić M., Harničárová M., Stojanović B., Influence of Al2O3 nanoparticles addition in ZA-27 alloy-based nanocomposites and soft computing prediction, Lubricants, 11, 1, 2023, Paper 24

Miladinović S., Stojanović B., Gajević S., Vencl A., Hypereutectic aluminum alloys and composites: A review, Silicon, 15, 6, 2023, 2507-2527

Gajević S., Miladinović S., Džunić D., Stojanović B., Vencl A., A review on mechanical and tribological properties of aluminium-based metal matrix nanocomposites, 18th International Conference on Tribology – SERBIATRIB '23, Kragujevac, 17-19.05.2023, zbornik radova, 226-230

Stojanović B., Gajević S., Miloradović N., Nikolić R., Miladinović S., Svoboda P., Vencl A., Comparative analysis of hybrid composites based on A356 and ZA-27 alloys regarding their tribological behaviour, Komunikácie – Communications, 25, 3, 2023, B215-B227

Dimić A., Vencl A., Ristivojević M., Mitrović R., Mišković Ž., Milivojević A., Influence of the running-in process on the working ability of contact surfaces in lubricated sliding conditions, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236, 4, 2022, 691-700

Vasiljević S., Glišović J., Stojanović B., Vencl A., Review of the coatings used for brake discs regarding their wear resistance and environmental effect, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236, 10, 2022, 1932-1949

Stojanović B., Gajević S., Kostić N., Miladinović S., Vencl A., Optimization of parameters that affect wear of A356/Al2O3 nanocomposites using RSM, ANN, GA and PSO methods, Industrial Lubrication and Tribology, 74, 3, 2022, 350-359

Kandeva M., Kalitchin Z., Zadorozhnaya E., Vencl A., Performance characteristics of lubricant based on rapeseed oil containing different amounts of metal-containing additive, Industrial Lubrication and Tribology, 74, 3, 2022, 309-315

Assenova E., Vencl A., Tribology and self-organization in reducing friction: A brief review, Tribology and Materials, 1, 1, 2022, 35-41

Kandeva M., Zagorski M., Nikolić R., Stojanović B., But A., Botko F., Piteľ J., Vencl A., Friction properties of the heat-treated electroless Ni coatings embedded with c-BN nanoparticles, Coatings, 12, 7, 2022, Paper 1008

Vulović S., Todorović A., Stančić I., Popovac A., Stašić J.N., Vencl A., Milić-Lemić A., Study on the surface properties of different commercially available CAD/CAM materials for implant-supported restorations, Journal of Esthetic and Restorative Dentistry, 34, 7, 2022, 1132-1141

Vencl A., Stojanović B., Gojković R., Klančnik S., Czifra Á., Jakimovska K., Harničárová M., Enhancing of ZA-27 alloy wear characteristics by addition of small amount of SiC nanoparticles and its optimisation applying Taguchi method, Tribology and Materials, 1, 3, 2022, 96-105

Klobčar D., Pušavec F., Bračun D., Garašić I., Kožuh Z., Vencl A., Trdan U., Influence of friction riveting parameters on the dissimilar joint formation and strength, Materials, 15, 19, 2022, Paper 6812

Vencl A., Stojanović B., Miladinović S., Klobčar D., Prediction of the wear characteristics of ZA-27/SiC nanocomposites using the artificial neural network, 6th International Scientific Conference "COMETa 2022", Jahorina (Bosna i Hercegovina), 17-19.11.2022, zbornik radova, 107-114

Stojanović B., Vencl A., Skulić A., Miladinović S., Gajević S., Influence of materials on the efficiency of worm gear transmission, 6th International Scientific Conference "COMETa 2022", Jahorina (Bosna i Hercegovina), 17-19.11.2022, zbornik radova, 402-409

Vencl A., Šljivić V., Pokusová M., Kandeva M., Sun H., Zadorozhnaya E., Bobić I., Production, microstructure and tribological properties of Zn-Al/Ti metal-metal composites reinforced with alumina nanoparticles, International Journal of Metalcasting, 15, 4, 2021, 1402-1411

Vencl A., Kandeva M., Zadorozhnaya E., Svoboda P., Michalec M., Milivojević A., Trdan U., Studies on structural, mechanical and erosive wear properties of ZA-27 alloy-based micro-nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235, 7, 2021, 1509-1518

Gajević S., Miladinović S., Stojanović B., Vencl A., Wear of A356/Al2O3 nanocomposites and optimisation of material and operating parameters, 10th International Conference on Tribology – BALKANTRIB '20, Beograd, 20-22.05.2021, zbornik radova, 17-18

Stojanović B., Vencl A., Miloradović N., Gajević S., Miladinović S., Optimization of tribological behaviour of hybrid composites based on A356 and ZA-27 alloys, 10th International Conference on Tribology – BALKANTRIB '20, Beograd, 20-22.05.2021, zbornik radova, 21-22

Kandeva M., Kalitchin Z., Zadorozhnaya E., Vencl A., Influence of the amount of metal-containing additive on performance characteristics of lubricant based on rapeseed oil, 10th International Conference on Tribology – BALKANTRIB '20, Beograd, 20-22.05.2021, zbornik radova, 79-80

Vencl A., Kandeva M., Enhancing of Zn-Al alloys properties in tough conditions by addition of nanoparticles and nano- and microparticles instead of Si, International Conference on Raw Materials and Circular Economy – RawMat2021, Athens (Grčka), 05-09.09.2021, Paper 4 (ITHACA Industrial Workshop)

Laera A.M., Massaro M., Dimaio D., Vencl A., Rizzo A., Residual stress and tribological performance of ZrN coatings produced by reactive bipolar pulsed magnetron sputtering, Materials, 14, 21, 2021, Paper 6462

Vencl A., Bobić I., Stanković M., Hvizdoš P., Bobić B., Stojanović B., Franek F., Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 3, 2020, Paper 115

Michalec M., Svoboda P., Krupka I., Hartl M., Vencl A., Investigation of the tribological performance of ionic liquids in non-conformal EHL contacts under electric field activation, Friction, 8, 5, 2020, 982-994

Kandeva M., Svoboda P., Nikolov N., Todorov T., Sofronov Y., Pokusová M., Vencl A., Effect of silicon carbide nanoparticles size on friction properties of electroless nickel coatings, Journal of Environmental Protection and Ecology, 21, 4, 2020, 1314-1325

Veličković S., Stojanović B., Babić M., Vencl A., Bobić I., Vadászné Bognár G., Vučetić F., Parametric optimization of the aluminium nanocomposites wear rate, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 1, 2019, Paper 19

Vencl A., Vučetić F., Bobić B., Pitel J., Bobić I., Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles, The International Journal of Advanced Manufacturing Technology, 100, 9-12, 2019, 2135-2146

Veličković S., Stojanović B., Vencl A., Babić M., Džunić D., Pantić M., Šljivić V., Tribological behaviour of A356/SiC nanocomposite, 16th International Conference on Tribology – SERBIATRIB ‘19, Kragujevac, 15-17.05.2019, Zbornik radova je štampan u vidu časopisa: Proceedings on Engineering Sciences, 1, 1, 2019, 115-123

Vencl A., Ivanović L., Stojanović B., Zadorozhnaya E., Miladinović S., Svoboda P., Surface texturing for tribological applications: A review, 16th International Conference on Tribology – SERBIATRIB ‘19, Kragujevac, 15-17.05.2019, Zbornik radova je štampan u vidu časopisa: Proceedings on Engineering Sciences, 1, 1, 2019, 227-239

Bobić B., Vencl A., Ružić J., Bobić I., Damnjanović Z., Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting, Journal of Composite Materials, 53, 15, 2019, 2033-2046

Bognár G., Vencl A., Experimental investigation of viscosity of glycerol based nanofluids containing carbon nanotubes, Tribology in Industry, 41, 2, 2019, 267-273

Vencl A., Bobić I., Bobić B., Jakimovska K., Svoboda P., Kandeva M., Erosive wear properties of ZA-27 alloy-based nanocomposites: Influence of type, amount and size of nanoparticle reinforcements, Friction, 7, 4, 2019, 340-350

Vaxevanidis N.M., Vencl A., Assenova E., Kandeva M., Psyllaki P., Scientific literature on thermal spray coatings from Southeastern Europe: A ten years bibliometric analysis, FME Transactions, 47, 3, 2019, 649-657

Vencl A., Vaxevanidis N.M., Kandeva M., A bibliometric analysis of scientific research on tribology of composites in Southeastern Europe, 14th International Conference on Tribology – ROTRIB’19, Cluj-Napoca (Rumunija), 19-21.09.2019, Paper FW 1 (Session: Friction and Wear), Zbornik radova je štampan u vidu časopisa: IOP Conference Series: Materials Science and Engineering, 724, 2020, Paper 012012

Vencl A.A., Mrdak M.R., Thermal cycling behaviour of plasma sprayed NiCr-Al-Co-Y2O3 bond coat in thermal barrier coating system, Thermal Science, 23, Supplement 5, 2019, S1789-S1800

Stojanović B., Vencl A., Bobić I., Miladinović S., Skerlić J., Experimental optimisation of the tribological behaviour of Al/SiC/Gr hybrid composites based on Taguchi’s method and artificial neural network, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 6, 2018, Paper 311

Vencl A., Kandeva M., Bobić I., Influence of nanoparticles amount on erosive wear properties of ZA-27 alloy-based dual-size composites, 1st International Conference on Technological Innovations in Metals Engineering (TIME), Haifa (Izrael), 30-31.05.2018, zbornik sažetaka, 48

Vencl A., Mazeran P.-E., Bellafkih S., Noël O., Assessment of wear behaviour of copper-based nanocomposite at the nanoscale, Wear, 414-415, 2018, 212-218

Vencl A., Bobić B., Vučetić F., Svoboda P., Popović V., Bobić I., Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 11, 2018, Paper 513

Vencl A., Šljivić V., Bobić I., Metal-metal composites with Zn-Al alloy base and addition of Ti microparticles reinforced with ceramic nanoparticles, 13th International Conference on Tribology – BULTRIB ‘18, Sofia (Bugarska), 25-27.10.2018, Paper 3 (Plenary Session), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 7, 2018, 131

Vaxevanidis N.M., Vencl A., Assenova E., Kandeva M., Psyllaki P., Scientific literature on thermal spray coatings from Southeastern Europe: A ten years bibliometric analysis, 13th International Conference on Tribology – BULTRIB ‘18, Sofia (Bugarska), 25-27.10.2018, Paper 23 (Third Session), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 7, 2018, 121

Kandeva M., Karastoyanov D., Nikolcheva G., Stojanović B., Svoboda P., Vencl A., Tribological studies on copper-based friction linings, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, 17-19.05.2017, zbornik radova, 51-60, rad štampan i u časopisu: Tribology in Industry, 39, 2, 2017, 228-237

Vučetić F., Veličković S., Milivojević A., Vencl A., A review on tribological properties of microcomposites with ZA-27 alloy matrix, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, 17-19.05.2017, zbornik radova, 169-176

Vencl A., Mrdak M., Hvizdos P., Tribological properties of WC-Co/NiCrBSi and Mo/NiCrBSi plasma spray coatings under boundary lubrication conditions, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, 17-19.05.2017, zbornik radova, 186-195, rad štampan i u časopisu: Tribology in Industry, 39, 2, 2017, 183-191

Ivanović L., Vencl A., Stojanović B., Marković B., Biomimetics design for tribological applications, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, 17-19.05.2017, zbornik radova, 663-672, rad štampan i u časopisu: Tribology in Industry, 40, 3, 2018, 448-456

Noel O., Vencl A., Mazeran P.-E., Bridging the gap between macro and nano-scale wear behavior: An experimental attempt, International Conference on “Trends in Nanotribology 2017” (TiN17), Trst (Italija), 26-30.06.2017, zbornik sažetaka

Vencl A., Bobić I., Kandeva M., Influence of small addition of nano particles on mechanical and erosive wear properties of zinc-based nanocomposites, International Conference on “Trends in Nanotribology 2017” (TiN17), Trst (Italija), 26-30.06.2017, zbornik sažetaka

Cherkezova-Zheleva Z., Paneva D., Kolev H., Petkova V., Vencl A., Temperature dependence of structural transformations and properties on CRM content in iron-based metallic glasses, E-MRS 2017 Fall Meeting, Warsaw (Poljska), 18-21.09.2017, Paper I.P.26 (Symposium I: Solutions for Critical Raw Materials Under Extreme Conditions, Session: Poster Session)

Noel O., Vencl A., Mazeran P.-E., Exploring wear at the nanoscale with circular mode atomic force microscopy, Beilstein Journal of Nanotechnology, 8, 2017, 2662-2668

Kandeva M., Grozdanova T., Karastoyanov D., Ivanova B., Jakimovska K., Vencl A., Wear under vibration conditions of spheroidal graphite cast iron microalloyed by Sn, Journal of the Balkan Tribological Association, 22, 2A-I, 2016, 1729-1740

Kandeva M., Karastoyanov D., Assenova E., Jakimovska K., Simeonov S., Vencl A., The influence of the Valena metal-plating additive on tribotechnical characteristics of the steel-bronze tribological system, Journal of Friction and Wear, 37, 2, 2016, 187-190, rad štampan i na ruskom jeziku: Кандева М., Карастоянов Д., Асенова Е., Якимовска К., Симеонов С., Венцл А., Влияние металлоплакирующей присадки Валена на триботехнические характеристики узла трения сталь 45 – БрО5Ц5С5, Трение и износ (Friction and Wear), 37, 2, 2016, 238-243

Vencl A., Kandeva M., Karastoyanov D., Influence of oil-soluble additive Valena on the friction in a “journal-bush” tribological system, AComIn Doors Open Days, Sofia (Bugarska), 15-16.01.2016, Posters, Poster 6 (Session: Thermo and High Speed Cameras)

Noel O., Mazeran P.-E., Vencl A., Wear mechanisms of Cu reinforced with nano and micro Al2O3 particles investigated with the AFM circular mode, 611. WE-Heraeus-Seminar: Mechanisms of Tribology, Bad Honnef (Nemačka), 29.03-01.04.2016, zbornik sažetaka, Poster Session II

Noël O., Mazeran P.-E., Vencl A., Exploring nano-wear mechanisms of Cu-based composites with the AFM circular mode, The Second European Workshop on Understanding and Controlling Nano and Mesoscale Friction, Riga (Letonija), 04-07.07.2016, zbornik sažetaka, Poster N°14

Vencl A., Bobić I., Differences between macro- and nanohardness of MMC materials, The Second European Workshop on Understanding and Controlling Nano and Mesoscale Friction, Riga (Letonija), 04-07.07.2016, zbornik sažetaka, Poster N°25

Vencl A., Gašić V., Stojanović B., Fault tree analysis of most common rolling bearing tribological failures, 13th International Conference on Tribology – ROTRIB’16, Galați (Rumunija), 22-24.09.2016, Paper TME 7 (Session: Tribology of Machine Elements), Zbornik radova je štampan u vidu časopisa: IOP Conference Series: Materials Science and Engineering, 174, 2017, Paper 012010

Vencl A., Advanced metal matrix composites and coatings for tribological heavy-duty applications, International Industrial Workshop “Innovation towards Technology for Extreme Conditions Industry”, Burgos (Španija), zbornik sažetaka

Stojanović B., Veličković S., Vencl A., Babić M., Petrović N., Miladinović S., Cherkezova-Zheleva Z., Optimization and prediction of aluminium composite wear using Taguchi design and artificial neural network, 12th International Conference on Tribology – BULTRIB ‘16, Sofia (Bugarska), 27-29.10.2016, Paper 4 (Section Session I), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 6, 2016, 38-45

Vaxevanidis N.M., Fountas N.A., Ntziantzias I., Koutsomichalis A., Vencl A., Experimental investigation and statistical analysis of surface roughness parameters in milling of PA66-GF30 glass-fibre reinforced polyamide, 12th International Conference on Tribology – BULTRIB ‘16, Sofia (Bugarska), 27-29.10.2016, Paper 4 (Section Session IV), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 6, 2016, 304-314

Veličković S., Garić S., Stojanović B., Vencl A., Tribological properties of aluminium matrix nanocomposites, Applied Engineering Letters, 1, 3, 2016, 72-79

Vencl A., Tribological behavior of ferrous-based APS coatings under dry sliding conditions, Journal of Thermal Spray Technology, 24, 4, 2015, 671-682

Bobić B., Bobić I., Vencl A., Babić M., Mitrović S., Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution, 14th International Conference on Tribology – SERBIATRIB ‘15, Beograd, 13-15.05.2015, zbornik radova, 67-72, rad štampan i u časopisu: Tribology in Industry, 38, 1, 2016, 115-120

Vencl A., Katavić B., Marković D., Ristic M., Gligorijević B., The tribological performance of hardfaced/thermal sprayed coatings for increasing the wear resistance of ventilation mill working parts, 14th International Conference on Tribology – SERBIATRIB ‘15, Beograd, 13-15.05.2015, zbornik radova, 159-169, rad štampan i u časopisu: Tribology in Industry, 37, 3, 2015, 320-329

Kandeva M., Ivanova B., Karastoyanov D., Vencl A., Assenova E., Influence of the metal-plating additive “Valena” on wear of the spheroidal graphite cast iron microalloyed by Sn, 14th International Conference on Tribology – SERBIATRIB ‘15, Beograd, 13-15.05.2015, zbornik radova, 236-242

Vaxevanidis N.M., Vencl A., Psyllaki P., Research on tribology in Southeastern Europe: A bibliometric study, 14th International Conference on Tribology – SERBIATRIB ‘15, Beograd, 13-15.05.2015, zbornik radova, 583-595, rad štampan i u časopisu: FME Transactions, 43, 3, 2015, 259-268

Vencl A., Mazeran P.-E., Noël O., Friction and wear of Cu-based micro and nano composite at the macro and nanoscale, The International Conference on Understanding and Controlling Nano and Mesoscale Friction, Istanbul (Turska), 22-26.06.2015, zbornik sažetaka, 100

Vencl A., Bobić I., Kandeva M., Karastoyanov D., Tribology of metal matrix micro- and nanocomposites, 11th International Conference on Tribology – BULTRIB ‘15 & International Scientific Conference “70 years FIT”, Sozopol (Bugarska), 11-13.09.2015, Paper 5 (Plenary Session), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 5, 2015, 10-19

Noel O., Mazeran P.-E., El-Kirat K., Nasrallah H., Vencl A., Kluza K., Circular mode AFM: A new mode for investigating nanotribology, International Tribology Conference (ITC 2015), Tokyo (Japan), 16-20.09.2015, zbornik sažetaka, Paper 20aE-06 (Session 5: Micro- and Nano-Tribology), 548-549

Kandeva M., Grozdanova T., Karastoyanov D., Ivanova B., Vencl A., Wear under vibration conditions of spheroidal graphite cast iron microalloyed by Sn, 1st International Conference on Tribology – TURKEYTRIB ‘15, Istanbul (Turska), 07-09.10.2015, zbornik sažetaka, Paper TM 7 (Section: Tribology in Manufacturing)

J. Ruzic, S. Gyoshev, N. Stoimenov, K. Jakimovska, A. Vencl, D. Karastoyanov, Optimization and application of advanced laser nanoparticle sizer on wide range of materials, International Conference “AComIn 2015”, Sofia (Bugarska), 10-11.11.2015, zbornik proširenih sažetaka, Paper 5 (Session 4: Optimization and Intelligent Control)

A. Vencl, K. Jakimovska, B. Ivanova, J. Ruzic, S. Simeonov, M. Kandeva, Static and kinetic friction of electroless Ni composite coatings, 22nd International Scientific Conference on Achievements in Mechanical and Materials Engineering (AMME'2015), Zakopane (Poljska), 06-09.12.2015, zbornik sažetaka, 66-67, rad je umesto u Zborniku radova štampan u časopisu: Journal of Achievements in Materials and Manufacturing Engineering, 70, 1, 2015, 13-21

Vencl A., Bobic I., Stojanovic B., Tribological properties of A356 Al-Si alloy composites under dry sliding conditions, Industrial Lubrication and Tribology, 66, 1, 2014, 66-74

Vencl A., Rajkovic V., Zivic F., Friction and wear properties of copper-based composites reinforced with micro- and nano-sized Al2O3 particles, The First European Workshop on Understanding and Controlling Nano and Mesoscale Friction, Can Picafort (Španija), 26-29.05.2014, zbornik sažetaka, 17

Vencl A., Rac A., Diesel engine crankshaft journal bearings failures: Case study, Engineering Failure Analysis, 44, 2014, 217-228

Banjac M., Vencl A., Termodinamička analiza procesa trenja i trošenja, International Conference on Materials, Tribology, Recycling – MATRIB 2014, Vela Luka (Hrvatska), 26-28.06.2014, zbornik radova, 20-29

Kandeva M., Ivanova B., Assenova E., Vencl A., Influence of additives and selective transfer on wear reduction in the lubricated contact, International Conference on Materials, Tribology, Recycling – MATRIB 2014, Vela Luka (Hrvatska), 26-28.06.2014, zbornik radova, 197-206

Vencl A., Bobić I., Vučetić F., Bobić B., Kandeva M., The influence of strontium addition on the tribological properties of Zn25Al3Si alloy in boundary lubricated condition, International Conference on Materials, Tribology, Recycling – MATRIB 2014, Vela Luka (Hrvatska), 26-28.06.2014, zbornik radova, 609-616

Bobić I., Ružić J., Bobić B., Babić M., Vencl A., Mitrović S., Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macro particles, Materials Science and Engineering A, 612, 2014, 7-15

Vencl A., Bobić I., Vučetić F., Bobić B., Ružić J., Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition, Materials & Design, 64, 2014, 381-392

Kandeva M., Karastoyanov D., Vencl A., Peichev I., Ivanova B., Assenova E., Wear-resistance of composite coatings deposited by gas-flame supersonic HVOF process, XIV Международная научная конференция «Трибология и надёжность» (14th International Scientific Conference “Tribology and Reliability”), Saint Petersburg (Rusija), 17-19.09.2014, zbornik radova, 307-321

Koutsomichalis A., Vaxevanidis N.M., Vencl A., Psyllaki P., Mechanical and wear behaviour of titania plasma-sprayed coatings, 11th International Conference in Manufacturing Engineering THE “A” Coatings, Thessaloniki (Grčka), 01-03.10.2014, zbornik radova, 185-191

Kandeva M., Vencl A., Assenova E., Karastoyanov D., Grozdanova T., Abrasive wear of chemical nickel coatings with boron nitride nano-particles, 11th International Conference in Manufacturing Engineering THE “A” Coatings, Thessaloniki (Grčka), 01-03.10.2014, zbornik radova, 319-325

Vencl A., Rajkovic V., Zivic F., Friction and wear properties of copper-based composites reinforced with micro- and nano-sized Al2O3 particles, 8th International Conference on Tribology – BALKANTRIB ‘14, Sinaia (Rumunija), 30.10-01.11.2014, zbornik radova, 357-364

Kočić M., Vencl A., Bobić I., Ristić M., Antić M., Milutinović Z., Joining of composite materials based on Al-Si alloys by using the GMAW process, Welding and Material Testing, 23, 3, 2014, 9-12

Banjac M., Vencl A., Otović S., Friction and wear processes – Thermodynamic approach, Tribology in Industry, 36, 4, 2014, 341-347

Ristivojević M., Lazović T., Vencl A., Studying the load carrying capacity of spur gear tooth flanks, Mechanism and Machine Theory, 59, 2013, 125-137

Mrdak M.R., Vencl A., Nedeljkovic B.D., Stanković M., Influence of plasma spraying parameters on properties of thermal barrier coatings, Materials Science and Technology, 29, 5, 2013, 559-567

Stojanovic B., Babic M., Mitrovic S., Vencl A., Miloradovic N., Pantic M., Tribological characteristics of aluminium hybrid composites reinforced with silicon carbide and graphite. A review, Journal of the Balkan Tribological Association, 19, 1, 2013, 83-96

Vencl A., Gligorijević B., Katavić B., Nedić B., Džunić D., Abrasive wear resistance of the iron- and WC-based hardfaced coatings evaluated with scratch test method, 13th International Conference on Tribology – SERBIATRIB ‘13, Kragujevac, 15-17.05.2013, zbornik radova, 75-79, rad štampan i u časopisu: Tribology in Industry, 35, 2, 2013, 123-127

Bobić B., Vencl A., Babić M., Mitrović S., Bobić I., The influence of corrosion on the microstructure of thermally treated ZA27/SiCp composites, 13th International Conference on Tribology – SERBIATRIB ‘13, Kragujevac, 15-17.05.2013, zbornik radova, 106-112, rad štampan i u časopisu: Tribology in Industry, 36, 1, 2014, 33-39

Stanković M., Vencl A., Marinković A., A review of the tribological properties of PTFE composites filled with glass, graphite, carbon or bronze reinforcement, 13th International Conference on Tribology – SERBIATRIB ‘13, Kragujevac, 15-17.05.2013, zbornik radova, 135-140

Bobić I., Babić M., Vencl A., Mitrović S., Bobić B., Veštačko starenje tiksolivene ZA27 legure i čestičnih ZA27/SiC kompozita, 13^th International Conference on Tribology – SERBIATRIB ‘13, Kragujevac, 15-17.05.2013, zbornik radova, 409-413

Vencl A., Rajkovic V., Zivic F., Mitrović S., Cvijović-Alagić I., Jovanovic M.T., The effect of processing techniques on microstructural and tribological properties of copper-based alloys, Applied Surface Science, 280, 2013, 646-654

Ristivojevic M., Lazovic T., Vencl A., Influence of the pitch point position on tooth flanks wear, 5th World Tribology Congress (WTC 2013), Turin (Italija), 08-13.09.2013, zbornik radova, Paper 1020 (Session: Surface Tribology 6 – Contact Mechanics 3)

Vencl A., Tribological behaviour of ferrous-based APS coatings under dry sliding conditions, 5th World Tribology Congress (WTC 2013), Turin (Italija), 08-13.09.2013, zbornik radova, Paper 1207 (Session: Surface Tribology 20 – Coatings 7)

Bobić I., Babić M., Vencl A., Bobić B., Mitrović S., Artificial aging of thixocast ZA27 alloy and particulate ZA27/SiCp composites, International Journal of Materials Research, 104, 10, 2013, 954-965

Kandeva M., Vencl A., Assenova E., Influence of “Valena” metal-plating additive on the friction properties of ball bearings, 10th International Conference on Tribology – BULTRIB ‘13, Sofia (Bugarska), 24-26.10.2013, Paper 11_SS1 (Sectional Session I), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 4, 2014, 18-24

Vencl A., Bobić I., Vučetić F., Bobić B., The influence of strontium addition on the tribological properties of Zn25Al1Si alloy in boundary lubricated condition, 10th International Conference on Tribology – BULTRIB ’13, Sofia (Bugarska), 24-26.10.2013, Paper 03_SS2 (Sectional Session II), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 4, 2014, 25-30

Vasic B., Popovic V., Vuchic V.R., Danon G., Vencl A., Defining the functional and physical compatibility of a modernized tramway rolling stock with a newly planned LRT system: A case study of Belgrade, Transportation Planning and Technology, 35, 3, 2012, 241-261

Rac A., Vencl A., Ecological and technical aspects of the waste oils influence on environment, 3rd International Conference on Diagnosis and Prediction in Mechanical Engineering Systems – DIPRE ‘12, Galaţi (Rumunija), 31.05-01.06.2012, zbornik radova, Paper 6 (Session: Lubrication and Lubricants), rad štampan i u časopisu: Annals of "Dunărea de Jos" University of Galaţi. Fascicle VIII, Tribology, 18, 1, 2012, 5-11

Assenova E., Majstorovic V., Vencl A., Kandeva M., Green tribology and quality of life, International Convention on Quality 2012, Beograd, 05-07.06.2012, zbornik radova, 32-38, rad štampan i u časopisu: Advanced Quality, 40, 2, 2012, 26-32

Кандева М., Карастоянов Д., Венцл А., Ерозийно износване на никелови покрития с наноразмерни частици от силициев карбид, 9th National Conference on Tribology with International Participation – BULTRIB ‘12, Sofia (Bugarska), 18-20.10.2012, Paper BT-53 (Session BT-III), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 3, 2013, 264-271

Gligorijevic B.R., Vencl A., Katavic B.T., Characterization and comparison of the carbides morphologies in the near surface region of the single- and double layer iron-based hardfaced coatings, XIV International Symposium "Young People and Multidisciplinary Research" – ISYPMR 2012, Timișoara (Rumunija), 15-16.11.2012, zbornik rezimea, 7-8, rad je umesto u Zborniku radova štampan u časopisu: Scientific Bulletin of the "Politehnica" University of Timișoara. Transaction on Mechanics, 57 (71), Special Issue S1, 2012, 15-20

Zivic F., Babic M., Cvijovic-Alagic I., Mitrovic S., Vencl A., Wear behaviour of Ti6Al4V alloy against Al2O3 under linear reciprocating sliding, Journal of the Balkan Tribological Association, 17, 1, 2011, 27-36

Zivic F., Babic M., Mitrovic S., Vencl A., Continuous control as alternative route for wear monitoring by measuring penetration depth during linear reciprocating sliding of Ti6Al4V alloy, Journal of Alloys and Compounds, 509, 19, 2011, 5748-5754

Bobić B., Mitrović S., Babić M., Vencl A., Bobić I., Corrosion behaviour of the as-cast and heat-treated ZA27 alloy, 12th International Conference on Tribology – SERBIATRIB '11, Kragujevac, 11-13.05.2011, zbornik radova, 91-97, rad štampan i u časopisu: Tribology in Industry, 33, 2, 2011, 87-93

Bobić I., Babić M., Mitrović S., Vencl A., Bobić B., Uticaj temperature na mehaničke karakteristike čestičnih ZA27/Al2O3 kompozita, 12th International Conference on Tribology – SERBIATRIB '11, Kragujevac, 11-13.05.2011, zbornik radova, 412-417

Vencl A., Ferrous-based coatings for engine cylinder bores made of aluminium alloys: Tribological properties, International Conference on Materials, Tribology, Recycling – MATRIB 2011, Vela Luka (Hrvatska), 29.06-01.07.2011, zbornik radova, 527-535

Vencl A., Arostegui S., Bobic I., Tribological properties of compocasted A356 aluminium alloy composite reinforced with Al2O3, SiC and graphite particles, 38th Leeds-Lyon Symposium on Tribology, Lyon (Francuska), 06-09.09.2011, zbornik plenarnih predavanja i rezimea, Paper 4 (Session III: Control of Friction and Wear)

Vencl A., Optimization of the deposition parameters of thick atmospheric plasma spray coatings, 7th International Conference on Tribology – BALKANTRIB ‘11, Thessaloniki (Grčka), 03-05.10.2011, zbornik radova, 275-282, rad štampan i u časopisu: Journal of the Balkan Tribological Association, 18, 3, 2012, 405-414

Vencl A., Arostegui S., Favaro G., Zivic F., Mrdak M., Mitrović S., Popovic V., Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections, Tribology International, 44, 11, 2011, 1281-1288

Mrdak M., Vencl A., Uticaj parametara nanošenja NiCr prevlake plazma sprej postupkom u atmosferskim uslovima na njene mehaničke karakteristike i strukturu, Tehnička dijagnostika, 10, 3, 2011, 9-14

Vencl A., MMCs based on hypoeutectic Al-Si alloy: Tribological properties in dry sliding conditions, 8th National Conference on Tribology with International Participation – BULTRIB ‘11, Sofia (Bugarska), 28-29.10.2011, Paper 1 (First Session), Zbornik radova je štampan u vidu časopisa: Tribological Journal BULTRIB, 2, 2, 2012, 17-23

Vencl A., Manić N., Popovic V., Mrdak M., Possibility of the abrasive wear resistance determination with scratch tester, Tribology Letters, 37, 3, 2010, 591-604

Vencl A., Tribological properties of thixocasted and heat treated hypoeutectic Al-Si alloy A356, 8th International Symposium INSYCONT '10, Cracow (Poljska), 07-09.07.2010, Paper 9 (Session IV), rad je umesto u Zborniku radova štampan u časopisu: Scientific Problems of Machines Operation and Maintenance, 44, 3, 2009, 15-23

Vencl A., Bobic I., Arostegui S., Bobic B., Marinković A., Babić M., Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC + graphite particles, Journal of Alloys and Compounds, 506, 2, 2010, 631-639

Vencl A., Arostegui S., Bobic I., Tribological properties of compocasted A356 aluminium alloy composite reinforced with Al2O3, SiC and graphite particles, First International Brazilian Conference on Tribology – TriboBr-2010, Rio de Janeiro (Brazil), 24-26.11.2010, Proceedings, 157-169, rad štampan bez saglasnosti i znanja autora

Vencl A., Mrdak M., Banjac M., Correlation of microstructures and tribological properties of ferrous coatings deposited by atmospheric plasma spraying on Al-Si cast alloy substrate, Metallurgical and Materials Transactions A, 40, 2, 2009, 398-405

Mrdak M., Vencl A., Ćosić M., Microstructure and mechanical properties of the Mo-NiCrBSi coating deposited by atmospheric plasma spraying, FME Transactions, 37, 1, 2009, 27-32

Marinković A., Vencl A., Influence of the solid lubricant particles reinforcement on composites tribological properties, 11th International Conference on Tribology – SERBIATRIB '09, Beograd, 13-15.05.2009, zbornik radova, 78-83

Vencl A., Arostegui S., Favaro G., Possibility of adhesion/cohesion bond strength evaluation of the thick plasma sprayed coatings with scratch tester, World Tribology Congress 2009, Kyoto (Japan), 06-11.09.2009, zbornik radova, 918

Babic M., Vencl A., Mitrović S., Bobić I., Influence of T4 heat treatment on tribological behavior of ZA27 alloy under lubricated sliding condition, Tribology Letters, 36, 2, 2009, 125-134

Vencl A., Bobić I., Mišković Z., Effect of thixocasting and heat treatment on the tribological properties of hypoeutectic Al-Si alloy, Wear, 264, 7-8, 2008, 616-623

Babić M., Rac A., Ivković B., 15 years of the Serbian Tribology Society - origin and activities, 6th International Conference on Tribology – BALKANTRIB '08, Sozopol (Bugarska), 12-14.06.2008, zbornik plenarnih predavanja i rezimea, 24-28, rad štampan u časopisu: Journal of the Balkan Tribological Association, 14, 3, 2008, 284-291

Vencl A., Rac A., Marinković A., Tribological properties of ferrous-based coatings deposited by APS on Al-alloy substrate under dry sliding conditions, 6th International Conference on Tribology – BALKANTRIB '08, Sozopol (Bugarska), 12-14.06.2008, zbornik plenarnih predavanja i rezimea, 149

Vencl A., Bobić I., Tribological properties of A356 Al-Si alloy base composite reinforced with Al2O3 particles (MMC), 5th Congress of the Metallurgists of Macedonia, Ohrid (Makedonija), 17-20.09.2008, zbornik radova u elektronskoj verziji, M8–07-E

Rac A., Vencl A., Performance investigation of chain saw lubricants based on new sunflower oil (NSO), ÖTG-Symposium 2008, Wiener Neustadt (Austrija), 20.11.2008, zbornik radova, 249-257, rad štampan i u časopisu: Tribologie und Schmierungstechnik, 56, 3, 2009, 51-54

Vencl A., Bobić I., Jovanović M.T., Babić M., Mitrović S., Microstructural and tribological properties of A356 Al-Si alloy reinforced with Al2O3 particles, Tribology Letters, 32, 3, 2008, 159-170

Rac A., Vencl A., Savić Lj., Stanje tržišta maziva u svetu – pogled na tržište Srbije, 10th International Conference on Tribology – SERBIATRIB '07, Kragujevac, 19-21.06.2007, zbornik radova, 193-196

Vencl A., Rac A., Ivković B., Investigation of abrasive wear resistance of ferrous-based coatings with scratch tester, 10th International Conference on Tribology – SERBIATRIB '07, Kragujevac, 19-21.06.2007, zbornik radova, 113-116, rad štampan i u časopisu: Tribology in Industry, 29, 3-4, 2007, 13-16

Marinković A., Vencl A., Wallace P., Portable DAQ equipment with LabVIEW as a tool for tribology experiments and condition monitoring, 10th International Conference on Tribology – SERBIATRIB '07, Kragujevac, 19-21.06.2007, zbornik radova, 105-108

Rac A., Tribotehnika u službi održavanja za održivu budućnost, Konferencija održavanja „KOD-2006“, Tivat (Crna Gora), 27-30.06.2006, zbornik radova u elektronskoj verziji, 1-8

Vencl A., Avramović S., Marinković A., Prevlaka na bazi gvožđa naneta na osnovu od Al legure plazma sprej postupkom u atmosferskim uslovima, 31. Savetovanje proizvodnog mašinstva Srbije i Crne Gore, Kragujevac, 19-21.09.2006, zbornik radova, 539-546

Mišković Z., Bobić I., Tripković S., Rac A., Vencl A., The structure and mechanical properties of an aluminium A356 alloy base composite with Al2O3 particle additions (MMC), 4th Balkan Conference on Metallurgy, Zlatibor, 27-29.09.2006, zbornik radova, 509-514, rad štampan i u časopisu: Tribology in Industry, 28, 3-4, 2006, 23-27

Vencl A., Rac A., Bobić I., Mišković Z., Tribological properties of Al-Si alloy A356 reinforced with Al2O3 particles, 4th Balkan Conference on Metallurgy, Zlatibor, 27-29.09.2006, zbornik radova, 527-534, rad štampan i u časopisu: Tribology in Industry, 28, 1-2, 2006, 27-31

Vencl A., Mrdak M., Cvijović I., Microstructures and tribological properties of ferrous coatings deposited by APS (Atmospheric Plasma Spraying) on Al-alloy substrate, FME Transactions, 34, 3, 2006, 151-157

Rac A., Vencl A., Oštećenja i otkazi metalnih kliznih ležaja, Tehnička dijagnostika, 4, 2, 2005, 59-69

Rac A., Vencl A., Tribological and design parameters of lubricated sliding bearings, 5th International Conference on Tribology – BALKANTRIB '05, Kragujevac, 15-18.06.2005, zbornik radova, 52-56, rad štampan i u časopisu: Tribology in Industry, 27, 1-2, 2005, 12-16

Vencl A., Rac A., Bobić I., Tribological behaviour of Al-based MMCs and their application in automotive industry, 5th International Conference on Tribology – BALKANTRIB '05, Kragujevac, 15-18.06.2005, zbornik radova, 331-338, rad štampan i u časopisu: Tribology in Industry, 26, 3-4, 2004, 31-38

Rac, A., Ekološki aspekti poslovanja sa mazivima i moguća rešenja, Konferencija održavanja „KOD-2005“, Bar (Crna Gora), 27-30.06.2005, zbornik radova u elektronskoj verziji, 1-6

Rosić B., Marinković A., Vencl A., Optimum design of multispeed gearboxes and modeling of transmission components, The Fifth International Conference  “Heavy Machinery - HM 2005”, Kraljevo, 28.06-03.07.2005, zbornik radova, I C.17-I C.20

Rac A., Bouzakis K.-D., Vencl A., Tsouknidas A., Tribological properties of thixoforming Al-alloy A356 and influence of heat treatment, 2nd International Conference on Manufacturing Engineering “ICMEN”, Kallithea of Chalkidiki (Grčka), 05-07.10.2005, zbornik radova, 509-516

Babić M., Ninković R., Rac A., Sliding wear behavior of Zn-Al alloys in conditions of boundary lubrication, The Annals of University “Dunarea de Jos” of Galati, Fascicle VIII, Tribology, 2005, 60-64

Rac A., Definisanje strategije održavanja kao ekonomske kategorije, Tehnička dijagnostika, 3, 2, 2004, 25-30

Vencl A., Ivljanin B., Dojčinović M., Testing of the mechanical properties for 15Mo3 steel, Third Youth Symposium on Experimental Solid Mechanics, Porretta Terme (Italija), 12-15.05.2004, zbornik radova, 123-124

Rac A., Tribologija i održavanje mašinskih sistema: mesto i uloga, XXIX naučno-stručni skup „Održavanje mašina i opreme“, Banja Vrujci, 31.05-03.06.2004, zbornik radova, 193-200

Rosić B., Marinković A., Vencl A., Cylindrical gears modeling using CATIA software, 4th International Conference “Research and Development in Mechanical Industry – RaDMI 2004”, Zlatibor, 31.08-04.09.2004, zbornik radova, Vol. 1, 73-77

Rosić B., Marinković A., Vencl A., Modeliranje i strukturalna optimizacija konstrukcionih oblika cilindričnih zupčanika, Naučno-stručni skup „Istraživanje i razvoj mašinskih elemenata i sistema – IRMES '04“, Kragujevac, 16-17.09.2004, zbornik radova, 173-178

Rac A., Vencl A., Tribological coatings on aluminium alloys used in engine cylinder bore-piston system, Mobility & Vehicles Mechanics (MVM), 30, Special Edition, 2004, 105-113

Vencl A., Rac A., New wear resistant Al based materials and their application in automotive industry, Mobility & Vehicles Mechanics (MVM), 30, Special Edition, 2004, 115-139

Rac A., Praćenje stanja i dijagnostika otkaza kliznih ležaja, Osma internacionalna konferencija o tribologiji – ITC' 03, Beograd, 08-10.10.2003, zbornik radova, 271-275

Vencl A., Rac A., Tribologija vetrogeneratora, Osma internacionalna konferencija o tribologiji – ITC' 03, Beograd, 08-10.10.2003, zbornik radova, 276-279

Rac A., Definisanje strategije održavanja kao ekonomske kategorije, Konferencija održavanja „KOD-2003“, Herceg Novi (Crna Gora), 29-31.10.2003, zbornik radova, 21-26

Vencl A., Sedmak A., Grujić B., Analiza uzroka otkaza i troškova zamene dela isparivačkih cevi sa TE „Kostolac B“, Konferencija održavanja „KOD-2003“, Herceg Novi (Crna Gora), 29-31.10.2003, zbornik radova, 83-90

Rac A., Dijagnostika otkaza i održavanje mašina, Tribologija u industriji, 22, 2, 2002, 23-25

Rac A., Maziva za prenosnike motornih vozila, Tribologija u industriji, 22, 2, 2002, 26-28

Babić M., Ninković R., Rac A., Zn-Al legura RAR 27 - iskustva iz istraživanja i održavanja tehničkih sistema, 26. majski skup održavalaca Jugoslavije „Održavanje tehničkih sistema“, Novi Sad, 22-24.05.2002, zbornik radova, 267-276

Babić M., Ninković R., Rac A., Tribološki aspekt primene Zn-Al legura za izradu mašinskih elemenata, Naučno-stručni skup „Istraživanje i razvoj mašinskih elemenata i sistema – IRMES 2002“, Jahorina, 19-20.09.2002, zbornik radova, 307-312

Rac A., Analiza oštećenja i otkaza kao kriterijum odlučivanja u oblasti održavanja, XXV jugoslovenski majski skup „Održavanje industrijskih postrojenja“, Beograd, 29-31.05.2001, zbornik radova, 227-235

Rac A., Babić M., Ninković R., Theory and practice of Zn-Al sliding bearings, Journal of the Balkan Tribological Association, 7, 3-4, 2001, 234-240

Rac A., Maziva i njihova primena, Sedma jugoslovenska konferencija o tribologiji – YUTRIB '01, Beograd, 11-12.10.2001, zbornik radova, 2.1-2.8

Vencl A., Grujić B., Sedmak A., Stanojević-Šumar Z., Vinulović Z., Živković Ž., Ispitivanje i analiza stanja materijala ovesnih cevi kotla, Tehnika, 55, 4-5, 2000, 61-66

Rac A., Monitoring maziva kao deo proaktivnog održavanja mašinskih sistema, XXIV jugoslovenski majski skup održavalaca sredstava za rad – YUMO 2000, Herceg Novi (Crna Gora), 31.05-02.06.2000, zbornik radova, knjiga 1, 157-162

Rac A., Ninković R., Tribological properties of Zn-Al27 bearing alloy under boundary lubrication, The First Mediterranean Tribology Conference, Jerusalem (Izrael), 08-09.11.2000, zbornik rezimea, 16

Rac A., The role and requirements of up-to-date lubricants, The First Mediterranean Tribology Conference, Jerusalem (Izrael), 08-09.11.2000, zbornik rezimea, 59

Rac A., Babić M., Ninković R., Theory and practice of Zn-Al sliding bearings, The 3rd International Conference of Tribology – BALKANTRIB '99, Sinaia (Rumunija), 02-04.06.1999, zbornik radova II, 127-133

Rac A., Maziva u službi održavanja mašina, Šesta jugoslovenska konferencija o tribologiji – YUTRIB '99, Kragujevac, 29-30.09.1999, zbornik radova, 3-4

Rac A., Tribologija zupčastih parova, Šesta jugoslovenska konferencija o tribologiji – YUTRIB '99, Kragujevac, 29-30.09.1999, zbornik radova, 57-58

Ninković R., Babić M., Rac A., Domaće Zn-Al legure kao tribološki materijal, Šesta jugoslovenska konferencija o tribologiji – YUTRIB '99, Kragujevac, 29-30.09.1999, zbornik radova, 59-60

Rac A., Podmazivanje zupčastih reduktora, Sedmi Severov simpozijum o mehaničkim prenosnicima, Subotica, 13.10.1999, zbornik radova, 29-34

Rac A., Ninković N., Pregled istraživanja i primene Zn-Al legure domaće proizvodnje kao materijala za tribološke komponente, V jugoslovenski simpozijum sa međunarodnim učešćem iz oblasti mehanizacije u rudarstvu, Beograd, 02-03.12.1999, zbornik radova

Rac A., Proaktivno održavanje - novi pristup u održavanju mašinskih sistema, XXIII jugoslovenski majski skup „Održavanje tehničkih sistema“, Kragujevac, 20-22.05.1998, zbornik radova, knjiga 2, 805-810

Rac A., Nikčević V., Ninković R., Tribological study of zinc-aluminium alloys as bearing materials, 5th International Symposium “INSYCONT '98”, Krakow (Poljska), 16-18.09.1998, rad štampan u časopisu: Problemy Eksploataciji, 30, 3, 1998, 221-229

Rac A., Contemporary lubricants: role and requirements, Tribology in Industry, 20, 4, 1998, 137-141

Rac A., Savremena strategija održavanja tribomehaničkih sistema, XXII majski skup održavalaca Jugoslavije, Novi Sad, 07-09.05.1997, zbornik radova

Rac A., Doprinos tribologije štednji energije u transportu, Peta međunarodna konferencija o tribologiji – YUTRIB '97, Kopaonik, 18-20.06.1997, zbornik radova, 9-10, kompletan rad štampan u časopisu: Tribologija u industriji, 19, 4, 1997, 138-142

Rac A., Nikčević, V., Quality assurance of tribomechanical system using failure mode and effects analysis, VI International Symposium INTERTRIBO '96, Stará Lesná (Slovačka), 23-26.04.1996, zbornik radova

Rac A., Mitrovic R., Nikcevic V., Friction characteristics and temperature rise in sealed ball bearings, 2nd International Conference on tribology – BALKANTRIB '96, Thessaloniki (Grčka), 05-07.06.1996, zbornik radova, 660-666

Rac A., Tribološki aspekti održavanja proizvodne opreme, 26. međunarodno savetovanje proizvodnog mašinstva Jugoslavije, Podgorica-Budva (Crna Gora), 17-20.09.1996, zbornik radova, 501-506

Rac A., Pravci razvoja motora SUS i motornih ulja: Interakcija motor-motorno ulje, GALAX ‘96, Kopaonik, 25-28.09.1996, zbornika radova, 165-174, rad štampan u časopisu: Hemijska industrija, 50, 9, 1996, 371-376